Documentation

.idea/.gitignore

@@ -0,0 +1,8 @@
+# Default ignored files
+/shelf/
+/workspace.xml
+# Editor-based HTTP Client requests
+/httpRequests/
+# Datasource local storage ignored files
+/dataSources/
+/dataSources.local.xml

.idea/.name

@@ -0,0 +1 @@
+FloatPUMP

.idea/cmake.xml

@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeSharedSettings">
+    <configurations>
+      <configuration PROFILE_NAME="Debug-fw" ENABLED="true" GENERATION_DIR=".out/fw-debug" CONFIG_NAME="Debug" TOOLCHAIN_NAME="dev-arm-stm32" NO_GENERATOR="true" />
+      <configuration PROFILE_NAME="Release-fw" ENABLED="true" GENERATION_DIR=".out/fw-release" CONFIG_NAME="Release" TOOLCHAIN_NAME="dev-arm-stm32" NO_GENERATOR="true" />
+      <configuration PROFILE_NAME="RelWithDebInfo-fw" ENABLED="true" GENERATION_DIR=".out/fw-relwithdebinfo" CONFIG_NAME="RelWithDebInfo" TOOLCHAIN_NAME="dev-arm-stm32" NO_GENERATOR="true" />
+      <configuration PROFILE_NAME="MinSizeRel-fw" ENABLED="true" GENERATION_DIR=".out/fw-minsizerel" CONFIG_NAME="MinSizeRel" TOOLCHAIN_NAME="dev-arm-stm32" NO_GENERATOR="true" />
+    </configurations>
+  </component>
+</project>

.idea/floatpump-firmware.iml

@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<module classpath="CMake" type="CPP_MODULE" version="4" />

.idea/misc.xml

@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
+</project>

.idea/modules.xml

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="ProjectModuleManager">
+    <modules>
+      <module fileurl="file://$PROJECT_DIR$/.idea/floatpump-firmware.iml" filepath="$PROJECT_DIR$/.idea/floatpump-firmware.iml" />
+    </modules>
+  </component>
+</project>

.idea/vcs.xml

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="VcsDirectoryMappings">
+    <mapping directory="$PROJECT_DIR$" vcs="Git" />
+  </component>
+</project>

build-tools/README.md

@@ -1,4 +1,43 @@
-# Toolchain Setup
+# FloatPUMP - Firmware Repository
 
-## Prerequisites
+This repository contains the necessary files to completely build the firmware for the FloatPUMP controller.
+The toolchain used in this project is built up using **docker**. The following sections describe how to setup the jetbrains
+CLion IDE to automatically use the included docker image to build the project. It also contains some description
+on how to use OpenOCD to flash the controller using a **STLink-V2** Programmer.
+
+## Toolchain Setup
+This chapter describes how to setup the CLion IDE to use the toolchain built with docker.
+
+### Prerequisites
+ - Install jetbrains CLion IDE
  - Install Docker
+ - Open the Project by clicking _New project from version control_
+
+### Build the docker image
+You can build the image by yourself. Alternatively you can pull the image from the robtor.de registry.
+Open a command line and enter the subdirectory build-tools. There run the follwing command to
+build the docker image:
+
+`docker build -t dev-arm-stm32:latest .`
+
+As an alternative you could open the Dockerfile in this directory using CLion and build it directly out of the IDE!
+
+### Pulling the image
+This method is currently not supported. Coming soon...
+
+### Configure toolchain
+First enter the Settings dialog in CLion while the floatpump-firmware project is opened.
+Under `Build, Execution, Deployment > Toolchain` add a new toolchain and choose the type `docker`.
+Now setup everything as depicted in this screenshot:
+![toolchain_settings.png](toolchain_settings.png)
+
+If you named the image different than dev-arm-stm32:latest, choose the correct image corresponding to your name.
+
+Usually now the correct CMake build targets should appear under `Build, Execution, Deployment > CMake`.
+
+### Configure OpenOCD
+To configure OpenOCD for directly flashing and debugging out of CLion go to the BuildTargets dropdown in the 
+header line and click on `Edit configurations`.
+There add a new configuration for `OpenOCD` and enter the following proerties:
+![openocd_settings.png](openocd_settings.png)
+As `Board config file` chosse the correct `floatpump.cfg` file contained in the project root dir.